Edmonton Framing & Carpentry   |   Alpha-Omega Developments

Framing and carpentry sit at the core of every project Alpha-Omega Developments builds, from basements and renovations to garages, decks, and framing work for other builders.

Josh, a Red Seal journeyman in both carpentry and electrical, leads the work directly, and the team you meet at the walk-through frames the walls, hangs the doors, and lays the finish trim.

Alpha-Omega Developments frames basements and renovations in Edmonton

Framing is the first stage on every project Alpha-Omega Developments builds. Wall lines, bulkhead sizing, rough openings for doors, and backing are all built to the finished layout you sign off on at the walk-through.

Every decision behind the drywall shows up later in how the trim, doors, and finish carpentry land, which is why we all stages from the first to the last.

Basement and renovation framing

Alpha-Omega Developments frames every wall in a basement development or home renovation with the finished layout,  mechanical rough-ins, and finish carpentry already accounted for. Bulkhead locations, backing, ceiling blocking, doors, cabinets, and TV mounts are decided during framing. On older Edmonton homes, wall restructures and hallway reframes become part of the same framing phase.

Framing for homeowners and other builders

Framing jobs coupled with electrical rough-in are something we regularly fit into our schedule. When a homeowner or another builder is running the rest of a project, Alpha-Omega handles the basement framing and wall additions on its own. Layout gets walked with you before wall lines are chalked, and every stud goes up square, plumb, and to code so the crews coming in after have clean work to build on.

Alpha-Omega Developments handles the finish carpentry on every basement and renovation we build

Finish carpentry is the visible half of a build. Baseboards, casing, closet build-outs, stair details, and every door hang across a basement or renovation all run through Alpha-Omega Developments, handled by the same carpenters who framed the walls behind them.

Every door is hung level and plumb, with even reveals on top and at the sides. Hinges are mortised clean, stops are set to the finished frame, and doors are swing-tested on the actual floor. Passage, closet, and pocket doors all get the same treatment.

Alpha-Omega Developments builds detached and attached garages

Alpha-Omega Developments builds garages across Edmonton, from detached garages to attached additions with structural tie-ins, foundation through overhead door under one project scope.



Permits pulled at the start, inspections walked at each stage, same crew on site from day one to handover.

• Detached single and double garages
• Attached garage additions with structural tie-ins
• Overhead door framing and bulkhead sizing
• Man-door and window openings, roughed in
• Roof framing and truss coordination
• Interior framing for storage or workshop use

• Sheathing, house wrap, and vapour barrier
• Shingles and roof detailing
• Siding and trim to match the existing home
• Soffit, fascia, and eavestrough coordination
• Man-door and overhead door install
• Electrical rough-in tied into the main service where scoped
  

Alpha-Omega Developments builds decks across Edmonton

• Ground-level and elevated deck builds
• Attached and freestanding structures
• Screw pile, concrete pile, and pad footing systems
• Pressure-treated framing and joist layouts sized for load
• Ledger board attachment with proper flashing and lag detailing
• Hot tub landings framed for weight load

• Composite, cedar, and pressure-treated decking
• Guard rails, spindles, and glass panel systems
• Hidden fastener installation on composite decking
• Wrapped fascia and picture-frame border detailing
• Skirting and privacy screen work
• Integrated storage and bench build-outs



Custom carpentry, when it fits the project

Custom carpentry may become part of your job scope. Built-in shelving, feature walls, and one-off millwork come up on some of the basements and renovations Alpha-Omega runs. If a custom piece fits your project scope, we can build it alongside the rest of the finish carpentry.

Three steps from the walk-through to getting started

What our carpenters handle

All the way from framing to finish, here is the full scope of carpentry work Alpha-Omega Developments handles across basements, renovations, garages, decks, and older home overhauls.

A deck and swim spa landing built for safe water access

"Josh and his team gave us a high quality, safe deck for our new swim spa. It has allowed us safe access for our son with special needs to access the pool. Thanks Josh." -Mark



Alpha-Omega Developments extended a backyard deck and framed a landing for a new swim spa, built specifically to give the family's son safe access to the water. Board spacing, railing heights, and every step transition were planned around daily use, not just how the finished deck would look.

The result was a deck the family trusts every time their son gets in the water. Full build wrapped in two days.

Scope of Work

• Extension of the existing backyard deck footprint into a wider platform

• Landing framed and reinforced for swim spa weight load

• Safe access built into board spacing, railing heights, and step transitions



• Complete build delivered inside a two-day turnaround

Recent Framing & Carpentry Projects

FREQUENTLY ASKED

Questions Homeowners Ask Us

Do you do framing-only jobs, or only framing as part of a bigger project?

Yes. Alpha-Omega Developments does framing-only jobs across Edmonton when a homeowner or another contractor is running the rest of the project. Basement framing, interior wall additions, and garage framing all fit here. Reach out with the scope and we will let you know if it fits our schedule.

Do you build garages and decks as their own projects?

Yes. Alpha-Omega Developments builds garages and decks as standalone projects on a regular basis, handled foundation through finish by our in-house crew. Permits, framing, sheathing, roofing, decking, and railings all fall under one project scope.

Do you handle the permits and inspections?

Yes. Alpha-Omega pulls building permits for garage builds and decks that require them at the start of the job. Inspections are scheduled at each stage and usually walked directly with the inspector.

Do you do custom built-ins or feature walls?

If a custom piece fits your project scope, we build it alongside the rest of the finish carpentry. Ask at the walk-through and we will let you know what makes sense inside the project.

What sets Alpha-Omega’s carpentry apart from a general contractor?

The carpentry on our jobs runs entirely on our own in-house crew, led by Josh Olsen, a Red Seal journeyman in carpentry and electrical. Framing, electrical rough-in, and finish carpentry all fall under the same person’s judgment. Backing, blocking, and bulkhead calls are made once, with what comes next already in mind.

Service Area